Setting Up Your System Hardware
2 - 31
Powering On
Connect power and power on the system after you have connected the rest of
the equipment that you will use with it.
The VSX 3000, VSX 5000, and VSX 6000 systems have external power supplies.
The VSX 7000 and VSX 7000s systems come with a separate subwoofer. Power
to the system is supplied through the subwoofer.
Powering On the VSX 3000 Desktop System
The VSX 3000 system has three power switches.
To power on the VSX 3000:
1. Press the power switch near the connectors on the back of the system.
2. Press the power switch on the lower back corner of the monitor.
3. Press the power button on the front of the monitor.
Powering On Set-top and Component Systems
For set-top systems, the power switch is on the back panel.
For component systems, the power switch is on the front. The indicator light
in the switch provides this information:
• Light is green — system is powered on
• Light changes to from green to red, then to blue — system is powering off
• Light is blue — system is powered off
• Light is off — system is not connected to power
Do not use any power supply other than the one supplied with your VSX system.
Using the wrong power supply will void the warranty and may damage your system.
To Next Page
Loading...
Need help?
General
