Access the Settings menu via the icon in the top right-hand
corner of the display.
Enter sub menu’s using the arrows on the right-hand side.
Touch a grey toggle switch icon to turn it on; it will turn
yellow to indicate it is active. Press again to turn o.
To select an option within a list, simply press it. The yellow
tick icon will indicate what selection is active.
Exit the Sub menu’s by pressing the back arrow on the
heading at the top of the screen.
The settings you may wish to modify and view are split into
two sub menus: Trolley Settings and About.
Trolley Settings
• Change the distance units from yards to metres.
• Adjust the clock and apply daylight saving setting.
• Change between Men’s and Women’s Tees.
• Set a security pin which when active, will be required
when the trolley is powered up.
• Turn the Bluetooth on and o.
• Set a dierent language.
• Turn Demo mode on and o.
Note: A default pin of 7921 is used if ever you forget the
set security pin code.
About
The nal sub menu is the ‘About’ screen. Here you will nd:
• Trolley rmware versions (When contacting customer
service regarding a technical issue, they may request
the software versions found here).
• History showing the trolley odometer & run time.
• ‘Check for updates’. (Note: the trolley must be paired
to the App. Follow instructions on screen and on the
App.)
Exit the settings at any time via the icon in the top right-
hand corner of the display.
Page 14
SETTINGS
Settings Menu
Enter/Exit Settings
Trolley Settings
Press to enter sub-menus
About menu
Return to main Settings menu via heading
To Next Page
Loading...
Need help?
General
