Getting Started 1
Section 1: Getting Started
THANK YOU…
...for purchasing a Signature Slide Printer. The Signature Slide
Printer can significantly increase the efficiency of your lab
while helping to reduce the risk of misidentification of
specimens. It prints directly onto slides, eliminating hand-
writing or expensive, difficult to apply xylene-resistant labels.
With impressive 300 dpi print resolution, you can print text,
graphics and logos along with high-resolution linear and 2D
bar codes on every slide you process.
To begin using your Signature, please read this manual care-
fully. This Operator's Manual is a guide to the Signature Slide
Printer only. There are other accessories and software that
work with the Signature Slide Printers. Those items are
purchased separately and include their own user's manual.
NOTE ON TERMS AND CONVENTIONS
From this point forward, the following terms and conventions
will apply:
The Signature Slide Printer will be referred to simply as the
Printer.
A. CHOOSING A GOOD LOCATION
• Place the Printer in a location with adequate air circulation
to prevent internal heat build-up. You will need at least
16" (41 cm) of overhead space to allow the top cover to
open freely.
• Do not place the Printer near heat sources such as
radiators or air ducts, or in a place subject to direct
sunlight, excessive dust, mechanical vibration or shock.
To Next Page
Loading...
Need help?
General
