© 2012 by Proceq SA 20
6.5. File name of measurement series
In order to define the alphanumeric file name of the measurement series, proceed as follows:
• Press the key.
• Use the navigation keys to input the filename.
• Confirm selection with the key. The file name can be used as the reference to the
tested production lot / part. The file name identifies the test series after downloading the
data to a PC using Equolink 3 or the Equotip 3 Automation Package, respectively.
i
Note: Ensure that the disc symbol for automatic storage is displayed if the
data needs to be saved. If this function is switched off, the measured data
is lost once the series has been closed.
Note: Keyboard-style or SMS-style input modes can be used. The con-
figuration can be changed through “Config” – “User interface”. A USB key-
board, a USB mouse or a USB scanner may be connected to the connec-
tion ports (use the USB type A socket).
i
Note: When a measurement series has been closed and the series is
stored, the last alphanumeric character of the file name is automatically
incremented. A different file name can be defined manually by pressing the
key.
To Next Page
Loading...
Need help?
General
