PROLiNK® PRN3006L 4G LTE Wireless Router
• APN: Access Point Name, provided by your ISP. You are recommended to keep the default
value.
• User: Enter Username of the APN as provided by your ISP.
• Password: Enter Password of the APN as provided by your ISP.
• PDP Type: Select the type of your PDP (Packet Data Protocol).
• Authentication Preference: Some ISPs need a specific authentication type, please confirm it
with your ISP or keep the default value.
◦ PAP: Password Authentication Protocol. This protocol allows the device to establish
authentication with the peer using two handshakes. Select this option if the ISP requires this
authentication type.
◦ CHAP: Challenge Handshake Authentication Protocol. This protocol allows the device to
establish authentication with the peer using three handshakes and checking the peer identity
periodically. Select this option if the ISP requires this authentication type.
4G/3G/2G Modem
• Network Type: The device supports four modes of cellular network connection – Auto, 4G
Only, 3G Only and 2G Only. If your SIM card supports WCDMA, select 3G only; if your SIM
card supports LTE, select Auto or 4G only as you need, if your SIM Card support GSM then
select 2G.
PIN
• PIN Code: Enter SIM Card Lock Pin if you would like to enable the SIM Card Lock.
20
To Next Page
Need help?
General
