Pulsar NOVA User Manual

Pulsar Nova® sound level meter user manual
Page 51
AC Output Cables
The AC Output should be used with a PSR174, PSR177 or PSR185 Cable.
These cables are available from Pulsar Instruments plc or your local distributor. Do not
use any other cable with the Nova®. This may damage the instrument and invalidate
your warranty.
DC Output
The DC Output is provided on the 18 Pin Multi-IO socket at the bottom of the
instrument. The output is set to 25mV/dB with LAF updated 16 times per second.
DC Output Cables
The DC Output is available using a PSR174 Output Cable.
This cable is available from Pulsar Instruments plc or your local distributor. Do not use
any other cable with the Nova®. This may damage the instrument and invalidate your
warranty.
Accessories
The Nova® sound level meters can be used with a range of accessories. The most
commonly used accessories are listed below.
General Accessories
 Model 105 – Class 1 Acoustic calibrator
OR
 Model 106 – Class 2 Acoustic calibrator
 K4 – Hard kit case
 WS90 – Windshield
 CP1 – Carry pouch for sound level meter and calibrator
 TR1 – Tripod
Outdoor Measurement Kit
 WK3 – Outdoor weatherproof kit with heavy duty outdoor microphone system
Replacement Microphone Capsules
 PM1 – Class 1 ½” Electret condenser microphone capsule
 PM2 – Class 2 ½” Electret condenser microphone capsule

Pulsar NOVA Specifications

General

Brand	Pulsar
Model	NOVA
Category	Measuring Instruments
Language	English