Pulsar NOVA User Manual

Pulsar Nova® sound level meter user manual
Page 52
Cables
The Nova® sound level meters can be used with a range of cables. The standard cables
are listed below.
Microphone Extension Cables
 PSR202 - 2m long Microphone extension cable
 PSR205 - 5m long Microphone extension cable
 PSR210 - 10m long Microphone extension cable
Alternative lengths of microphone extension cable are available on request.
Input & Output Cables
 PSR101 - 1m Mini-B to Type A USB cable
 PSR171 - Nova® power input cable, 2.1mm power jack, 2m long
 PSR174 - Nova® AC & DC output, 18 way to 2 x phono, 1m long
 PSR176 - Nova® 12v Battery pack cable 2m long to tinned ends with inline fuse
 PSR177 - Nova® AC output cable, 3.5mm mono to 3.5mm stereo jack, 2m long
 PSR185 - Nova® AC output cable, 18 way to phono, 1m long
 PSR190 - Nova® power input cable, 2.1mm power jack and mains power supply
(Please specify Country)
NK:70 Random Incidence Adaptor
The NK:70 Random Incidence Adaptor is designed to modify
the response of the microphone capsule from Free Field to
Random Incidence in order to comply with the requirements of
ANSI S1.4.
For instruments supplied for use outside of the USA, this
adaptor may not be supplied. For further details, please
contact your local representative.
To fit the NK:70 Random Incidence Adaptor, push the adaptor
over the microphone grill. Do not attempt to remove the
microphone grill as this may cause damage to the capsule.
To calibrate the instrument fitted with the microphone capsule,
remove the NK:70 Adaptor and follow the instructions supplied
with the instrument. Do Not attempt to calibrate the
instrument with the NK:70 fitted.

Pulsar NOVA Specifications

General

Brand	Pulsar
Model	NOVA
Category	Measuring Instruments
Language	English