Pyronix EURO mini User Manual

EURO mini User Guide
Page: 9
4. Useful Features
4.1 The Chime Facility
The ‘C’ key can be used to select the ‘chime’
facility while the system is Unset.
For example, you may wish to be alerted if
someone enters through a particular door
during the day.
Simply press the ‘C’ key.
The display will show a ‘C’
Now if the door opens you will be alerted by
the ‘chime’ tone.
To cancel the ‘Chime’ function, simply press
‘C’ again.
Note: This is only operative on detectors
programmed for this purpose. If multiple
detectors are programmed to permit this, the
sounder will not distinguish between them.
4.2 Omitting An Input
At some time you may wish to isolate a
detector if a room is occupied.
Enter your PIN code or present your Tag.
While the exit tone is sounding press the
‘YES’ key.
When the ‘OMIT INPUT’ menu is displayed:
Key in the number of the zone you wish to
omit and press ‘YES’.
(Always use a leading zero, eg 02 is input 2)
If it has been accepted it will be displayed on
the screen.
Repeat for any other inputs that need to be omitted.
After 10 seconds
EURO mini will begin to set
These inputs will be omitted for this one set period only.
EURO mini
Time: 15:31 c
EURO mini
Time:
15:32
OMIT INPUT?

Pyronix EURO mini Specifications

General

Brand	Pyronix
Model	EURO mini
Category	Keypad
Language	English