QNAP TVS-73e Series User Manual

a. Log on to QTS as
administrator.
b. Go to Control Panel >
System
c. Check the value for
Total
QTS Installation
The TVS-
x73e uses the QNAP QTS operating system. You can install QTS using any of the following
methods.
Method
Qfinder Pro
installation
(Recommended)
If the NAS is connected to your local area
network, you can do the following:
•
Locate the NAS using Qfinder
•
Complete the steps in the Smart
Installation Guide
For details, see
Qfinder Pro.
Cloud installation
If the NAS is connected to the internet,
you can do the following:
•
Scan the QR code on the
•
Log into your myQNAPcloud
•
Use CloudLink to remotely access
your
NAS.
•
Complete the steps in the Smart
Installation Guide
For details, see
Cloud Key.
Local installation
If the NAS supports HDMI output, you can
do the following:
•
Connect the NAS to the required
hardware.
•
Complete the steps in the Smart
Installation Guide
For details, see
HDMI Connection
Installing QTS Using Qfinder Pro
Warning
Installing QTS deletes all data on the drives. Back up your data before proceeding.
1. Power on the NAS.
2.
Connect the NAS to your local area
Installation and Configuration
administrator.
System
> System Status >
Hardware Information
Total
memory.
x73e uses the QNAP QTS operating system. You can install QTS using any of the following
Description
Requirements
If the NAS is connected to your local area
network, you can do the following:
Locate the NAS using Qfinder
Pro.
Complete the steps in the Smart
Installation Guide
wizard.
For details, see
Installing QTS Using
• Computer
• Network
cable
• Qfinder Pro
installer
If the NAS is connected to the internet,
you can do the following:
Scan the QR code on the
NAS.
Log into your myQNAPcloud
account.
Use CloudLink to remotely access
NAS.
Complete the steps in the Smart
Installation Guide
wizard.
For details, see
Installing QTS Using the
•
Computer or mobile
• Network
cable
•
myQNAPcloud
• CloudKey
If the NAS supports HDMI output, you can
do the following:
Connect the NAS to the required
hardware.
Complete the steps in the Smart
Installation Guide
wizard.
For details, see
Installing QTS Using an
HDMI Connection
.
• Monitor
• HDMI cable
•
USB keyboard or remote control (not
available on all
Installing QTS Using Qfinder Pro
Installing QTS deletes all data on the drives. Back up your data before proceeding.
Connect the NAS to your local area
network.
TVS-x73e User Guide
Installation and Configuration
30
Hardware Information
.
x73e uses the QNAP QTS operating system. You can install QTS using any of the following
Requirements
cable
installer
Computer or mobile
device
cable
myQNAPcloud
account
USB keyboard or remote control (not
available on all
models)
Installing QTS deletes all data on the drives. Back up your data before proceeding.

QNAP TVS-73e Series Specifications

General

Brand	QNAP
Model	TVS-73e Series
Category	Storage
Language	English