TVS-x73e User Guide
Basic Operations 42
4.
Press and hold Enter.
The Change Password screen appears.
5.
Select Yes by pressing and holding Enter.
The New Password screen appears.
6.
Press Select and Enter to specify a new password.
•
Specify a password with 1 to 8 characters. The password can only contain numbers (0 to 9).
•
To remove the password, leave the password field blank.
Button Usage
Enter
Move to the next item in the New Password screen.
Select
Change a number in the New Password and Verify Password
screens.
7.
Press Enter.
The NAS saves the password.
LCD Error Messages
System Message Description
Sys. Fan Failed The system fan failed.
Sys. Overheat The system overheated.
HDD Overheat The drive overheated.
CPU Overheat The CPU overheated.
Network Lost
LAN 1, LAN 2, LAN3, and LAN 4 are disconnected in failover or are in
load-balancing mode.
LAN1 Lost LAN 1 is disconnected.
LAN2 Lost LAN 2 is disconnected.
LAN3 Lost LAN 3 is disconnected.
LAN4 Lost LAN 4 is disconnected.
HDD Failure The drive failed.
Vol1 Full The volume is full.
HDD Ejected The drive was ejected.
Vol1 Degraded The volume is in degraded mode.
Vol1 Unmounted The volume is unmounted.
Vol1 Nonactivate The volume is not activated.
LEDs
LEDs indicate system status and related information when the NAS is powered on. The following LED
information applies only when the drive is correctly installed and when the NAS is connected to the network.
For details on the location of the LEDs, see Components.
To Next Page
Loading...
Need help?
General
