QNAP TVS-73e Series User Manual

4. Basic Operations
This chapter describes basic NAS operations.
Power Button
Operation
Power on
Power off
Force power off
Reset Button
Operation
User Action
Basic system reset
Press and hold the
button for 3 seconds.
Advanced system
reset
Press and hold the
button for 15 seconds.
USB One Touch Copy Button
The USB One Touch Copy button allows you to copy data backups from an external USB device to the NAS
or from the NAS to an external USB device.
This feature supports incremental backups. The NAS only copies files that were modified or added after the
last backup.
This chapter describes basic NAS operations.
User Action
Press the button once.
The NAS powers on.
Press and hold the button for 1.5
seconds.
The NAS powers off.
Press and hold the button for 5
seconds.
The NAS shuts down.
Important
Use this method only
when the NAS is
unresponsive.
User Action
Result
Press and hold the
button for 3 seconds.
The following settings are reset to default:
•
System administrator password:
• TCP/IP configuration:
•
Obtain IP address settings automatically via
DHCP
• Disable jumbo frames
•
If port trunking is enabled (multi
only), the port trunking mode is reset to “Active
Backup (Failover)”.
•
System port: 8080 (system service
• Security level: Low (Allow all
connections)
• LCD panel password: (blank)
• VLAN: Disabled
Press and hold the
button for 15 seconds.
The default factory settings are restored.
• To
retrieve old data after an advanced system reset,
recreate the previous folder structure on the
USB One Touch Copy Button
The USB One Touch Copy button allows you to copy data backups from an external USB device to the NAS
or from the NAS to an external USB device.
This feature supports incremental backups. The NAS only copies files that were modified or added after the
TVS-x73e User Guide
Basic Operations 38
Result
The NAS powers on.
The NAS powers off.
The NAS shuts down.
Important
Use this method only
when the NAS is
unresponsive.
The following settings are reset to default:
System administrator password:
admin
Obtain IP address settings automatically via
If port trunking is enabled (multi
-LAN models
only), the port trunking mode is reset to “Active
System port: 8080 (system service
port)
connections)
The default factory settings are restored.
retrieve old data after an advanced system reset,
recreate the previous folder structure on the
NAS.
The USB One Touch Copy button allows you to copy data backups from an external USB device to the NAS
This feature supports incremental backups. The NAS only copies files that were modified or added after the

QNAP TVS-73e Series Specifications

General

Brand	QNAP
Model	TVS-73e Series
Category	Storage
Language	English