QNAP TVS-73e Series User Manual

21. Click Apply.
A confirmation message appears.
Warning
Clicking Confirm
deletes all data on the drive before installing QTS.
22. Click Confirm.
QTS is installed.
Installing QTS Using the Cloud Key
Warning
Installing QTS deletes all data on the drives. Back up your data before proceeding.
1. Power on the NAS.
2. Connect the NAS to the
internet.
3.
Go to the QNAP Cloud Installation page using one of the following
• On your computer, go to
http://install.qnap.com/
•
Scan the QR code on the NAS using a mobile
The web page lists all the uninitialized QNAP NAS devices on the local network.
4.
Find your NAS from the list and then click
Note
If your NAS is not listed, follow the instructions on the web page to specify the Cloud Key on the
NAS.
The ins
tallation wizard opens in the default web browser.
5.
Create an account or sign in to
Note
You must return to this page to complete the installation after creating an account.
6.
Specify the myQNAPcloud device name for the
Note
The myQNAPcloud device name is used when remotely accessing the NAS.
7. Optional: Select CloudLink.
Note
•
CloudLink allows you to remotely access the NAS without having to configure port
forwarding on your router.
using mobile apps.
• You
can also enable CloudLink by installing the CloudLink app on the
8. Click Next.
The
Smart Installation Guide
9. Perform any of the following
actions.
Installation and Configuration
A confirmation message appears.
deletes all data on the drive before installing QTS.
Installing QTS Using the Cloud Key
Installing QTS deletes all data on the drives. Back up your data before proceeding.
internet.
Go to the QNAP Cloud Installation page using one of the following
methods:
http://install.qnap.com/
.
Scan the QR code on the NAS using a mobile
device.
The web page lists all the uninitialized QNAP NAS devices on the local network.
Find your NAS from the list and then click
Initialize.
If your NAS is not listed, follow the instructions on the web page to specify the Cloud Key on the
tallation wizard opens in the default web browser.
Create an account or sign in to
myQNAPcloud.
You must return to this page to complete the installation after creating an account.
Specify the myQNAPcloud device name for the
NAS.
The myQNAPcloud device name is used when remotely accessing the NAS.
CloudLink allows you to remotely access the NAS without having to configure port
forwarding on your router.
You can remotely access the NAS by loggin
g into QTS or by
can also enable CloudLink by installing the CloudLink app on the
NAS.
Smart Installation Guide
opens in the default web browser.
actions.
TVS-x73e User Guide
Installation and Configuration
34
Installing QTS deletes all data on the drives. Back up your data before proceeding.
The web page lists all the uninitialized QNAP NAS devices on the local network.
If your NAS is not listed, follow the instructions on the web page to specify the Cloud Key on the
You must return to this page to complete the installation after creating an account.
CloudLink allows you to remotely access the NAS without having to configure port
g into QTS or by
NAS.

QNAP TVS-73e Series Specifications

General

Brand	QNAP
Model	TVS-73e Series
Category	Storage
Language	English