Qomo WIPS2 User Manual

52
< Wireless Setup>
 Wireless LAN: The default value is “Enable”
 SSID: SSID string, max. Length is 32 bytes.
 SSID Broadcast: The default value is “Enable”
 Channel: to set fixed channel or Auto. The “Auto” means after power
on WIPS
2
TWP-1500, it will scan all of wireless channel and select clear
one channel automatically.
 Encryption: you can select “Disable” or one of WEP/WPA/WPA2 64bit
or 128bit in ASCII or HEX string.
 Key: If Encryption is enabled, you have to set key value according to
the encryption mode you selected.
 Channel Bandwidth: select from 20M or Auto (40M/20M)
< AP Client>
 Connect to Existing AP: Input the SSID of Home WiFi AP you want to
connect.
 Encryption: you can select “Disable” or one of WEP/WPA/WPA2 64bit
or 128bit in ASCII or HEX string.
 Key: If Encryption is enabled, you have to set key value according to
the encryption mode you selected.
 Press Apply button, and follow the reboot instruction to make it work.
< Host Name and Domain Name>
 Host Name: It will use the same name as SSID for the device host
name
 Domain Name: You can also enter the domain name of this device if
there is DNS server available.
< Gatekeeper>
Gatekeeper is designed for ensuring the enterprise network security within
WIPS
2
TWP-1500 box
 All Block can block Guest Users(through wireless) to access all office
network(LAN),
 All Allow can pass Guest Users(through wireless) to access all office
network
 Internet Only can block Guest Users (through wireless) from office
network (LAN) but still reserve internet connection capability.
< SNMP >
 Enable or disable SNMP service
 User Name: configure the user name to manage this device through
SNMP
 Auth Password: configure the Auth password

Qomo WIPS2 Specifications

General

Brand	Qomo
Model	WIPS2
Category	Projector Accessories
Language	English