Scalar i500 Basic SNMP Reference Guide 9
IPv6 Interface Description
Name: ipv6IfDescr
Type: OBJECT-TYPE
OID: 1.3.6.1.2.1.55.1.5.1.2
Full path: iso(1).org(3).dod(6).internet(1).mgmt(2).mib-
2(1).ipv6MIB(55).ipv6MIBObjects(1).ipv6IfTable(5).ipv6IfEntry(1).ipv6IfDescr(2)
Module: IPV6-MIB
Parent: ipv6IfEntry
Prev sibling: ipv6IfIndex
Next sibling: ipv6IfLowerLayer
Numerical syntax: Octets
Base syntax: OCTET STRING
Composed syntax: DisplayString
Status: current
Max access: read-write
Description: A textual string containing information about the interface. This string may be set by the
network management system.
IPv6 Interface Lower Layer
Name: ipv6IfLowerLayer
Type: OBJECT-TYPE
OID: 1.3.6.1.2.1.55.1.5.1.3
Full path: iso(1).org(3).dod(6).internet(1).mgmt(2).mib-
2(1).ipv6MIB(55).ipv6MIBObjects(1).ipv6IfTable(5).ipv6IfEntry(1).ipv6IfLowerLayer(3)
Module: IPV6-MIB
Parent: ipv6IfEntry
Prev sibling: ipv6IfDescr
Next sibling: ipv6IfEffectiveMtu
Numerical syntax: Object Identifier
Base syntax: OBJECT IDENTIFIER
Composed syntax: VariablePointer
Status: current
Max access: read-only
Description: This object identifies the protocol layer over which this network interface operates.
• If this network interface operates over the data-link layer, then the value of this object refers to an
instance of ifIndex [6].
• If this network interface operates over an IPv4 interface, the value of this object refers to an instance
of ipAdEntAddr [3].
To Next Page
Loading...
Need help?
General