64 MIB Variables - Library System Information
Blade Controller Channel Mask
Name: blCtlrChannelMask
Type: OBJECT-TYPE
OID: 1.3.6.1.4.1.3764.1.10.10.16.3.1.3
Full path:
iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).adic(3764).storage(1).library(10).tapeLibraryMIB(
10).bladeInterfaces(16).blCtlrTable(3).blCtlrEntry(1).blCtlrChannelMask(3)
Module: ADIC-TAPE-LIBRARY-MIB
Parent: blCtlrEntry
Prev sibling: blCtlrType
Numerical syntax: Gauge (32 bit)
Base syntax: Gauge
Composed syntax: Gauge
Status: mandatory
Max access: read-write
Description: Specifies access permissions for this initiator in bits 0 through 18, as follows:
*************************************************
-* SCSI Channels *-
Bit 0 => Is access DISALLOWED to SCSI channel 1 ?
Bit 1 => Is access DISALLOWED to SCSI channel 2 ?
Bit 2 => Is access DISALLOWED to SCSI channel 3 ?
Bit 3 => Is access DISALLOWED to SCSI channel 4 ?
-* Ultra SCSI Channels *-
Bit 4 => Is access DISALLOWED to Ultra SCSI channel 1 ?
Bit 5 => Is access DISALLOWED to Ultra SCSI channel 2 ?
Bit 6 => Is access DISALLOWED to Ultra SCSI channel 3 ?
Bit 7 => Is access DISALLOWED to Ultra SCSI channel 4 ?
Bit 8 => Is access DISALLOWED to Ultra SCSI channel 5 ?
Bit 9 => Is access DISALLOWED to Ultra SCSI channel 6 ?
-* Fibre Channel *-
Bit 10 => Is access DISALLOWED to Fibre Channel 1 ?
Bit 11 => Is access DISALLOWED to Fibre Channel 2 ?
Bit 12 => Is access DISALLOWED to Fibre Channel 3 ?
Bit 13 => Is access DISALLOWED to Fibre Channel 4 ?
Bit 14 => Is access DISALLOWED to Fibre Channel 5 ?
Bit 15 => Is access DISALLOWED to Fibre Channel 6 ?
-* SSA Channels *-
Bit 16 => Is access DISALLOWED to SSA channel 1 ?
To Next Page
Loading...
Need help?
General