Quasar Palmcorder VM-D52 User Manual

23
Special Features
Focus
Use Manual Focus (MF) when :
• recording through glass.
• lighting is poor.
• subject is far away with objects in foreground.
• subject has distinct horizontal lines.
• subject is not centered in EVF.
• subject has a shiny surface.
• subject is slanted.
• subject is bright and flat, like a white wall.
• subject has fast motion, like a golf swing.
1 Press M.FOCUS so “MF” (Manual Focus)
appears in EVF.
2 Hold down “T” (telephoto) on POWER
ZOOM to maximum zoom in.
3 Press UP (FAR) or DOWN (NEAR) until
subject is in focus.
• Back away from subject if necessary.
4 Hold down “W” (wide angle) on POWER
ZOOM as desired.
• Refocus as needed when aiming at new
scenes.
Before you begin...
• Connect Camcorder to power source.
• Set POWER to CAMERA.
24
Camcorder automatically focuses on subject even during zooming.
Auto Focus is on when “MF” is not displayed in EVF.
Press
M.FOCUS to remove “MF” in EVF if necessary.
Auto Focus
Manual Focus
Macro Focus (close-ups)
Auto Focus functions up to 12.7 mm (1/2 inch) from subject.
Hold down “
W” on POWER ZOOM to maximum wide angle.
Bring Camcorder up close to the subject.
EVF Indication
1
3
05.VM-D52 Special p22-28 02.1.28, 9:57 AM23

Quasar Palmcorder VM-D52 Specifications

General

Brand	Quasar
Model	Palmcorder VM-D52
Category	Camcorder
Language	English