Quasar Palmcorder VM-D52 User Manual

29
For Your Information
Electronic Viewfinder Indications
Recording the Date and Time
a Do steps 1 and 2 above to select time/date,
date only, or no display.
bStart a recording (page 16).
• Only the Date and/or Time are recorded.
1 Set POWER to CAMERA.
2 Press DISPLAY
repeatedly to select
the following displays.
FULL
EMPTY
Tape Remaining:Battery Remaining:
FULL
EMPTY
• Tape remaining indicator operates a few
seconds after tape starts moving.
A Set POWER to CAMERA or VCR.
B Press MENU for MENU mode.
Press
UP or DOWN to select DISPLAY .
C Press DISPLAY to select OFF.
Press
MENU to exit.
D Press DISPLAY repeatedly to remove time/date.
Indications are restored the next time Camcorder is
turned on.
[CAMERA MODE] [VCR MODE]
Display-Off Mode
Tape remaining and battery charge level
can be displayed.
Before you begin...
• Connect Camcorder to power source.
2, B ,
C , D
1, A
06.VM-D52 Infor p29-34 02.1.28, 9:57 AM29

Quasar Palmcorder VM-D52 Specifications

General

Brand	Quasar
Model	Palmcorder VM-D52
Category	Camcorder
Language	English