Queclink GL200 User Manual

GL200 Manage Tool User Guide
TRACGL200MT002 - 24 -
3.2.5 Set the parameters of Auto-Unlock PIN
Step_1: Select “Auto-Unlock-PIN”, after that the parameters of GTPIN show in Command
Operation Space.
Step_2: The command message which shall be sent to GL200 will be generated based on input
and displayed here. Please note this command message can also be sent to GL200
through SMS or GPRS.
Step_3: It is recommended to read the parameters from GL200 and edit based on them
Step_4: Set the auto-unlock PIN parameters. Please refer to “GL200 @Track Air Interface
Protocol” for the meaning of each parameter.
Step_5: Click the “Send” button; download the parameters of GTPIN to GL200.
3.2.6 Set the parameters of Protocol Watchdog
Step_1: Select “Software Protocol Watchdog”, after that the parameters of GTDOG show in
Step_1
Step_2
Step_4
Step_3
Step_5
Step_1
Step_2
Step_3
Step_5
Step_4
Queclink
Confidential

Queclink GL200 Specifications

General

Brand	Queclink
Model	GL200
Category	GPS
Language	English