Queclink GL200 User Manual

GL200 Manage Tool User Guide
TRACGL200MT002 - 38 -
3.2.22 Set the parameters of User Defined Function
Step_1: Select “Store Command String”, after that the parameters of GTUDF show in Command
Operation Space.
Step_2: The command message which shall be sent to GL200 will be generated based on input
and displayed here. Please note this command message can also be sent to GL200 through
SMS or GPRS.
Step_3: It is recommended to read the parameters from GL200 and edit based on them.
Step_4: Set the User Defined parameters. Please refer to “GL200 @Track Air Interface Protocol”
for the meaning of each parameter.
Step_5: Click the “Send” button; download the parameters of GTUDF to GL200.
Step_1
Step_2
Step_4
Step_3
Step_5
Queclink
Confidential

Queclink GL200 Specifications

General

Brand	Queclink
Model	GL200
Category	GPS
Language	English