Queclink GL300 User Manual

GL300 @Tracker Air Interface Protocol
 0: Do not unlock SIM-PIN automatically.
 1: Each time the device powers on, it will detect whether the SIM card is locked with
a PIN. If it is locked, the device will unlock the PIN automatically for one time.
 <PIN>: The PIN code which is used when unlocks PIN automatically. If it is empty, the PIN
code saved in the device will be cleared.
 <PIN checking>: A numeric to indicate whether to lock the device with SIM-PIN.
 0: Do not lock the SIM-PIN.
 1: Lock the SIM-PIN.
The acknowledgment message of the AT+GTPIN command:
 +ACK:GTPIN,
Example:
+ACK:GTPIN,1A0102, 135790246811220,,000E,20101029085505,0027$
Parameter Length (byte) Range/Format Default
Protocol version 6 XX0000 – XXFFFF,
X∈{'A'-'Z','0'-'9'}
Unique ID 15 IMEI
Device name 20
Serial number 4 0000 – FFFF
Send time 14 YYYYMMDDHHMMSS
Count number 4 0000 – FFFF
Tail character 1 $ $
3.2.15. Digital Input Port Settings
 AT+GTDIS
Example:
AT+GTDIS=gl300,1,1,5,,,,,,0010$
Parameter Length(byte) Range/format Default
password 4~6 ‘0’-‘9’,’a’-‘z’,’A’-‘Z’ gl300
Input ID 1 1
1
Mode 1 0|1|2|3
0
Debounce time <=2 0-20 (×10ms) 5
reserved 0
reserved 0
reserved 0
reserved 0
reserved 0
Serial number 4 0000 – FFFF
Tail character 1 $
 <Input ID>: The ID of the digital input. It is always 1. If the filed is empty, the device will
ignore the following settings about the digital input 1, i.e. change nothing about the digital
input 1.
TRACGL300AN001 - 37 -
Queclink
Confidential

Queclink GL300 Specifications

General

Brand	Queclink
Model	GL300
Category	GPS
Language	English