25
CHC1102M GB F - REV005B
GB
SETTINGS MENU - CALIBRATION
AUTO FREE FALL
FREE FALL
SET VALUE:
0,5 s
Increase value
Confirm value and go back to CALIBRATION menu.
Select the available values: OFF, from 0.1s to 7s. (default: OFF)
Through this management we set the time required by the windlass
auto free fall system to deactivate itself.
Decrease value
0.1s
-
7s
SET SAILFREE FALL
SPEED 000 M/M
UP ALARM
ATTENTION: auto free fall management must be activated exclusively with windlasses equipped
with auto free fall system. Refer to the instruction manual relative to the windlass being used.
ATTENTION: If auto free fall management is activated, the "no sensor" signal time will vary
depending on the value entered in the AUTO FREE FALL parameter and the automatic descent
function will be deactivated; the latter will become active again once free fall management is
deactivated.
SETTING THE CHAIN COUNTER
To Next Page
Loading...
Need help?
General
