Quick CHC 1102 M User Manual

5
INSTALLATION
CHC1102M GB F - REV005B
GB
11
3
3
22
Max. 10 mm
EXAMPLES OF LAPS SENSOR INSTALLATION
22
44
2
2
22
Max. 10 mm
11
± 20°
horizontal windlasses
vertical windlasses
CHAIN COUNTER INSTALLATION TAKES PLACE IN THREE STEPS:
installation of the laps sensor on the windlass, installation of the socket and electrical connections.
Quick
®
windlasses
All Quick
®
windlasses come with a laps sensor suitable for use with chain counter CHC 1102 M.
Other windlasses
In order for the chain counter to measure the length of the chain lowered, it has to count the number of
revolutions completed by the gear that drives the chain (gypsy).
A laps sensor kit is supplied with the chain counter. This kit includes a cylindrical magnet, a magnetic field
sensor and two plastic adaptors to be used to fix the sensor. The magnet is to be fixed to the gypsy while
the magnetic sensor is to be fixed to the windlass base.
The standard installation procedure is described below. Unfortunately we cannot describe a procedure ap-
plicable to all types of windlass. Adapt this procedure to satisfy your own individual requirements.
MAGNET
SENSOR
ADAPTOR
ADAPTOR
1
2
3
4
Ideal
installation
Maximum
removal

Quick CHC 1102 M Specifications

General

Brand	Quick
Model	CHC 1102 M
Category	Cash Counter
Language	English