EasyManuals Logo
Home>Rajant>Network Hardware>BreadCrumb ES1

Rajant BreadCrumb ES1 User Manual

Rajant BreadCrumb ES1
101 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #21 background imageLoading...
Page #21 background image
2. Description of a BreadCrumb ES1
BreadCrumb ES1 is a fixed and mobile wireless device for use in indoor, protected and outdoor locations.
BreadCrumb ES1 is light-weight, supports up to 4 external antennas and is designed to be completely
mobile. The BreadCrumb ES1 must be powered by an external passive Power over Ethernet (PoE) source.
2.1 Radios
The BreadCrumb ES1 contains two radios. See Appendix Radio Channels and Frequencies for a list of the
channels and frequencies supported by each radio.
2.2 Enclosure
2.2.1 Enclosure Design
The ES1-5050CS enclosure is made of plastic (ASA UL94-HB) and has been designed for IP67 ingress pro-
tection against ingress of dust and water when installed with the approved mating connectors.
Notice
Notice
The ES1-5050CS nust be installed with the approved mating connectors. Ingress protection rating may
The ES1-5050CS nust be installed with the approved mating connectors. Ingress protection rating may
be adversely a
ected due to exposure to direct sunlight for extended periods. Excessive shock and vi-
be adversely affected due to exposure to direct sunlight for extended periods. Excessive shock and vi-
bration or temperature extremes or fluctuations may void the manufacturers warranty.
bration or temperature extremes or fluctuations may void the manufacturer’s warranty.
For information on the approved BreadCrumb ES1 sealed male Ethernet connector and cables, see
Ethernet Connector.
For information on the approved BreadCrumb ES1 sealed protective cap and male M8 cables, see M8
Connector.
The operating temperature range for the enclosure is -40 to 60 degrees C (-40 to 140 degrees F). The stor-
age temperature range for the enclosure is -40 to 70 degrees C (-40 to 158 degrees F).
The dimensions of the ES1-5050CS are 155 mm x 149 mm x 41 mm (6.079 inches x 5.830 inches x 1.575
inches) including all built-in features of the enclosure. These measurements do not include any antennas,
cables or mating sealed Ethernet connector.
The weight of the ES1-5050CS is 440 g +/- 10 g (15.5 oz +/- 0.4 oz), depending on the transceiver
configuration.
Figure: BreadCrumb ES1 Measurements in Inches (1 in = 2.54 cm)
Note
Note
The BreadCrumb ES1 is shown with a mating sealed Ethernet connector attached.
The BreadCrumb ES1 is shown with a mating sealed Ethernet connector attached.
21

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Rajant BreadCrumb ES1 and is the answer not in the manual?

Rajant BreadCrumb ES1 Specifications

General IconGeneral
BrandRajant
ModelBreadCrumb ES1
CategoryNetwork Hardware
LanguageEnglish

Related product manuals