Raymarine RAY 210VHF User Manual

3
1.3 SPECIFICATIONS
Appendix 1 : Design Specification Model RAY210
General : FCC Part 80, ITU Radio Regulations Appendix 18.
DOC CAT V RSS-18 Issue 2.
1.3.1 Electrical Specifications;
Transmitter
Channel 51 USA /International
Frequency Stability +/-5ppm(+/-0.0005%)
Channel Spacing 25KHz Increment
Power Output 25Watts Switchable to 1 Watt
into 50 ohm at 13.6 Vdc.
Modulation Frequency Modulated 16F3
(+/-4.5KHz at 1000Hz)
Modulation Audio within the limit of +/-3dB at
6dB/oct freq. curve (300-2.5KHz)
Hum & Noise Level Greater than 40dB below audio
Audio distortion less than 10% at 1KHz for +/-
3KHz deviation
Spurious & Harmonic greater than 70dB below carrier
power.
Antenna Impedance 50 ohms
Receiver
Channel 93 (Includes 10 WX Channels)
Frequency Range 156.025 to 163.275MHz in
25KHz increments
Frequency Stability ±5ppm (±0.0005%)
–20degree C to +50degree C
Sensitivity 0.3µV for 12dB SINAD
Squelch Sens. Threshold 0.2µV or better
Tight Squelch Sens. 1µV
Adjacent CH Rejection greater than 70dB
Spurious Image Rejection greater than 70dB
Intermodulation Rejection
greater than 70dB
Audio Output 4 Watts @ 4 ohms with Less
than 10% distortion
Hum & Noise greater than 40dB
Operating Requirement
Input Voltage 13.6 Vdc ±15% (11.6 to 15.6Vdc)
Current Required for
Transmit
Less than 5.5 A at 25 Watts
Less than 1.3 A at 25 Watts
Operating Temperature –20º C to +50º C

Raymarine RAY 210VHF Specifications

General

Brand	Raymarine
Model	RAY 210VHF
Category	Marine Radio
Language	English

Summary

Purpose and Important Notice

Important Notice

Crucial disclaimer about device accuracy and user responsibility for navigation.

SECTION 1 INTRODUCTION

General Overview

Introduction to the RAY210 marine radiotelephone and its capabilities.

Equipment Features

Lists the main built-in features and capabilities of the RAY210 unit.

Specifications

Details the electrical and mechanical specifications of the RAY210.

SECTION 2 INSTALLATION

Unpacking and Inspection

Instructions for safely unpacking and inspecting the RAY210 unit.

Equipment Supplied

Lists all standard equipment included with the RAY210 model.

Planning the Installation

Guidelines for choosing an optimal and safe installation location.

Mounting Options

Describes various methods for mounting the RAY210 unit.

Electrical Connections Overview

Details on making proper power and speaker connections.

DC Power and Speaker Connections

How to connect the DC power and external speaker cables.

External Speaker Connections

Specific instructions for connecting an external speaker.

Antenna Connections

Guidance on connecting the VHF antenna to the unit.

Antenna Mounting Suggestions

Recommendations for optimal VHF antenna placement.

Grounding

Procedures for properly grounding the RAY210 unit.

SECTION 3 OPERATIONS

Introduction to Operations

Overview of the RAY210's transmission and reception capabilities.

Controls and LCD Display

Detailed explanation of the RAY210's controls and LCD display elements.

Operating Controls

Description of each physical control button and its function.

LCD Display Indicators

Explanation of the various characters and symbols displayed on the LCD.

Operating Procedures Overview

Step-by-step guide for using the RAY210's various functions.

Basic Operating Procedures

Covers power on, volume, squelch, channel selection, and transmit.

Advanced Operating Modes

Covers international frequencies and weather channel selection.

SECTION 4 TECHNICAL DESCRIPTION

Receiving Circuit Operation

Explanation of the internal circuits involved in receiving signals.

Transmitting Circuit Operation

Explanation of the internal circuits involved in transmitting signals.

PLL Circuit Operation

Description of the Phase Lock Loop circuit's function and operation.

SECTION 5 MAINTENANCE

General Maintenance Information

Guidance on contacting support and general care.

Contacting Raymarine Technical Support

Contact details for technical assistance and service inquiries.

Preventative Maintenance

Recommended monthly procedures to ensure optimal performance.

Alignments and Service

Procedures for verifying and adjusting performance parameters.

Test Equipment and Setup

Lists necessary equipment and test setup for service.

PLL Adjustment

Steps for adjusting the PLL circuit for transmitter/receiver.

Transmitter Adjustments

Procedures for adjusting frequency and modulation.

Power Output and RF Sensitivity Adjustment

Steps for adjusting power output and receiver sensitivity.

Weather Alert Adjustment

Procedure for adjusting the weather alert frequency.

Troubleshooting Guide

A chart to help diagnose and resolve common unit issues.

Master Reset Procedure

Instructions for performing a master reset to clear problems.

SECTION 6 PARTS LIST & DRAWINGS

Parts List

Comprehensive list of all electronic components and their symbols.

Assembly Drawing

Exploded view showing how the RAY210 unit is assembled.

Schematic Diagrams

Detailed circuit diagrams for RF and CPU PCBs.

SECTION 7 APPENDIX

VHF Marine Channel Usage and Licensing

Guide to marine VHF channel usage and FCC licensing requirements.