RCA CC180 User Manual

Using the Optional RCA DC Car Cord Adapter
The optional RLA DCCO7 DC car cord allows you to power
your camcorde
truck, or RV. I
:
from the cigarette lighter socket of a car,
converts IZvolts to a 6-volt output.
Notes: Consult the installation and operating instructions enclosed
with the DCC07 for complete operating instructions.
CC07 to power the camcorder, your vehicle’s
Cautions: The DCC07 is designed to be used only with
vehicles having negative ground electrical systems.
Use only RCA car cord adapter DCC07 or car cord
adapter/charger DCC71 with this camcorder. Use of any
other car cord adapter may damage the camcorder and void
your warranty.
Attaching t$e RCA DCCO7 DC Car Cord Adapter
I
Cigarette Lighter Socket
I
Optional DCC07 Car Cord Adapter
A DCC07 DC Car Cord Adapter to
I.
2.
3.
4.
5 - .
8
If the batte
:
is attached to the camcorder, remove it.
Make sure t e camcorder’s power is turned off. Slide the
POWER SW tch to turn off the camcorder. The POWER
indicator wi I turn off.
Attach the p wer connector as shown above.
Take the ve icle’s cigarette lighter out of the socket.
Start the ve
4
icle’s engine.
Caution:
!I
prevent blowing the fuse in the car cord’s plug,
be sure to s rt the vehicle’s engine before inserting the plug
into the cig rette lighter socket. If it becomes necessary to
replace the 4 ar cord’s fuse, be sure to use a replacement fuse
with the exact current rating (amps).
6.
7.
Insert the car cord’s cigarette lighter plug into the vehicle’s
cigarette lighter’s socket. The POWER indicator on the car
cord adapter should light.
Slide the camcorder’s POWER switch to turn on the
camcorder. The POWER indicator will light.

RCA CC180 Specifications

General

Brand	RCA
Model	CC180
Category	Camcorder
Language	English