Use the Battery to Power Your Camcorder (continued)
BATTERY
EJECT
Button
CAMERA/
OFF/VCR
Switch
Rechargeable
Battery
Hold Battery
Flush and
Slide Down
Attach the Charged Battery
If the DC cable is attached to the
camcorder, remove it before attaching
the battery.
1. Align the reference arrow on the
battery to the arrow on the back of
the camcorder.
2. Hold the battery flush against the
camcorder while you slide it down in
the direction of the arrow.
3. Press and hold the small button on the
CAMERA/OFF/VCR switch while you
set it to CAMERA.
Remove the Battery
1. Set the CAMERA/OFF/VCR switch to
OFF.
2. Press and hold the BATTERY EJECT
button while removing the battery.
ATTENTION: LEAD ACID BATTERY MUST BE DISPOSED OF
PROPERLY. THE PRODUCT THAT YOU HAVE PURCHASED
USES A RECHARGEABLE BATTERY. AT THE END OF ITS
USEFUL LIFE, UNDER VARIOUS STATE AND LOCAL LAWS, IT
MAY BE ILLEGAL TO DISPOSE OF THIS BATTERY INTO THE
MUNICIPAL WASTE STREAM. CHECK WITH YOUR LOCAL
SOLID WASTE OFFICIALS FOR DETAILS IN YOUR AREA FOR
RECYCLING OPTIONS OR PROPER DISPOSAL.
Pb
16
To Next Page
Loading...
Need help?
General
