RCA Gemstar guide + User Manual

32 Chapter 2
Using the Remote Control
Using the INPUT Button
1. Repeatedly press the INPUT button to scroll through the available input
sources until you find the input associated with the component (such as
VCR or DVD player) you want to view.
2. Once you have found the input source you want, stop pressing INPUT.
• If you tune to INPUT 1 and your DVD is connected to that input, you
will be able to view your VCR. To play, stop, or rewind the VCR tape
using the remote that came with your TV, you must first press the
VCR1, VCR2, or AUX button to put the remote control in VCR mode.
There are other ways of selecting an input channel:
•Program the component (VCR, DVD, etc.) buttons on the remote control to
automatically tune to the correct input channel when pressed. For more
details on Auto Tuning, see Chapter 3.
• When viewing an input, to go back to viewing channels, press ANTENNA,
or press INPUT until you see your channel, or use the number keys to
enter the channel number.
AUS
E
TV
AUX
DVD
SAT • CABLE
PIP
S
WAP
S
KI
P
C
H
C
TR
L
V
O
V
L
V
O
V
L
FORMAT
MUTE
C
LEA
R
1
4
VCR1
VCR2
ON • OFF
CH +
INPUT
button
Note: Watch the channel banner to see the input
sources change each time you press the INPUT button.
Input source

RCA Gemstar guide + Specifications

General

Brand	RCA
Model	Gemstar guide +
Category	HDTV
Language	English