Chapter 4 61
Using the TV’s Menu System
Subwoofer
The built-in Subwoofer enhances low-frequency audio. The Subwoofer setting
can only be changed if the Fixed/Variable audio output is set to the Variable
Output. The choices are: Subwoofer On or Subwoofer Off.
Time Menu
The Time menu lets you set up time-related features such as: Sleep Timer, Wake-
up Timer, or Time of Day. Just follow the on-screen help text to assist you in
setting up the features–the information is explained in detail.
Note: If your TV does not automatically acquire the time, you must
remember to set your TV’s time when the time changes to Daylight Saving
Time. Sleep Timer and Wake-up Timer will not function as you expect if
you forget to change the TV’s time.
Connections Menu
The Connections menu specifies various ways to adjust the inputs to your television. Items in
the Connections menu are: Antenna Info, Channel Search, Software Upgrade, Signal Source,
Signal Type, Auto Tuning, DTVLink, Special Features, Ethernet Setup.
Antenna Info
This screen lists any channel EVER added to the TV. The list shows the channel
number, the station name when tuned, e.g. NBC, whether the channel is digital
or analog, which antenna is picking up the channel, and current signal strength
of digital channels.
When you move the highlight to the Antenna Info list, the TV attempts to tune to
the channel. You can then adjust your off-air antenna for maximum signal
strength (largest number) for the selected channel. The signal strength for a
digital channel will be shown as “- -” until the signal is strong enough for use,
then numbers will appear. Analog channels will always have the display,
“N/A”, since analog signal strength is not measured.
Only primary channels appear in the list. Subchannels, e.g. 8-1, 8-2, do not
appear.
*“Dolby”, “Pro Logic”, and the double-D symbol are trademarks of Dolby Laboratories.
To Next Page
Loading...
Need help?
General
