•Keep batteries out of the reach of children.
•Remove batteries if storing over 30 days.
CAUTION: To reduce the risk of fire or personal injury, use
only the battery listed in the instruction book.
HEADSET AND BELT CLIP OPERATION
CONNECTING AN OPTIONAL HEADSET TO THE HANDSET
For hands free conversation, connect the headset (optional) to
the HEADSET jack as shown. The handset receiver and
microphone are disabled when the headset is connected.
Adjust the headset to rest comfortably on top of your head and
over your ear. Move the microphone to approximately 2 to 3 inches
from your mouth.
•Press the talk/callback button to answer or place a call before
using the headset.
CONNECTING THE BELT CLIP
There are two slots, one on each side of the handset.
•Attach the belt clip by inserting the sides of the belt clip into
the slots. Snap the ends of the belt clip into place.
Slot for belt clip
Headset jack
Headset plug
DISPLAY MESSAGES
The following indicators show the status of a message or of
the unit.
REGISTRATION: Prompt telling you to enter registration
mode of handset.
ENTER NUMBER: Prompt telling you to enter the number
in one of the 40 memory locations.
ENTER NAME: Prompt telling you to enter the name in
one of the 40 memory locations.
ENTER LOCATION: Prompt telling you to assign the memory
location(from 01 to 40).
To Next Page
Loading...
Need help?
General
