Selecting the HDMI
audio input source
When you use PC/DVI AUDIO IN jack with HDMI
or DVI device, you must select HDMI audio input
source from "HDMI" or "DVI'.
4
| Press SETUP/TV MENU in the TV mode.The TV
menu screen will appear.
Press • or • to select "Audio", then press • or
ENTER.
3 Press • or • to select"HDMI 1 Audio".
Press < or • to select "HDMr' or "DVI".
4
When you connect the HDMI device to
the TV, select this setting.
DVh When you connect the DVI device to the
TV with analog audio cords, select this
setting.
Press EXIT/CANCEL to return to the normal
screen.
HDMI:
Turning off the built-in
speakers
Use this feature to turn the TV speakers off when
you connect an audio system (see pages 39).
1 Press SETUP/TV MENU.The menu screen will
appear.
2 Press • or • to select"Audio", then press • or
ENTER.
3 Press • or • to select"Speakers".
Press < or • to select "Off".
4. Press EXIT/CANCEL to return to the normal
H
screen.
NOTE:
• If "Off" is selected, "Speakers Off" will be displayed
on the screen when the volume is changed.
To turn on the built-in speakers:
Select "On" in step 3 above.
Adjusting the back lighting
The Backlight feature adjusts the screen
brightness for improved picture clarity.
1 Press SETUP/TV MENU in the TV mode.The TV
menu screen will appear.
Press • or • to select "Picture", then press • or
ENTER.
3 Press • or • to select"Picture Setting", then press
• or ENTER.The Picture Setting menu will appear.
4 Press • or • to select"Backlight".
5 Press < or • to adjust the setting.
6 Press EXIT/CANCEL to returnto the normal screen.
Checking the digital-
signal strength
This TV will allow you to view the digital signal
meter for digital channels.
1 Press SETUPFrV MENU in the TV mode.The TV
menu screen will appear.
2 Press • or • to select"Channel", then press • or
ENTER.
3 Press • or • to select"DTV Signal".
4 Press ENTER to check the Digital-signal strength.
•._ Press EXIT/CANCEL to return to the normal
screen.
NOTE:
• Signal meter feature is not available for analog
channels.
• After 240 seconds, Signal Meter screen will return
to normal TV-operation automatically.
Setting the auto shut off
If the Auto Shut Off feature is On, a station being
viewed stops broadcasting and the TV is not
operated, the TV will automatically shut itself off
after 15 minutes.
4
/ Press SETUP/TV MENU in the TV mode.The TV
menu screen will appear.
Press • or • to select "Setup", then press • or
ENTER.
3 Press • or • to select"Auto Shut Off".
Press 41or • to select "On" or "Off".
4- Press EXIT/CANCEL to return to the normal
H
screen.
25
To Next Page
Loading...
Need help?
General
