Connections to other equipment
The exact arrangement you use to interconnect various video and audio components to this unit is dependent
on the model and features of each component. Check the Owner's Manual provided with each component for
the location of video and audio inputs and outputs.
To connect the LCD TV/DVD to a VCR
Rear of the unit
_A&g#_'m i_/ To Video/Audio OUT /
,l ]
To LINE 2 VIDEO/AUDIO IN
Video/Audio cord (not supplied)
VCR
To connect the LCD TV/DVD to a VCR with an S-Video cord
If you connect a VCR with a S-Video cable to the S-VIDEO IN jack on the rear side of the unit, you must also
connect the audio cables to the AUDIO IN jacks on the rear side of the unit.
The S-Video cable only carries the video signal.The audio signal is separate.
NOTE:
• When the S-Video cable and the standard video cable are connected at the same time, the S-Video cable
takes precedence.
Rear of the unit
VCR
1
To Component OUT
DVD
I I
To Audio OUT
= _ L_:_, _#_0 To Audio OUT /
@ @====_ @
¢-
t j_ To LINE 1 AUDIO IN
To S-Video OUT
To LINE 1 [ Audio cord (not supplied)
S-VIDEO IN
S-Video cord (not supplied)
To connect to a DVD player with Component Video Input
You can enjoy a high quality picture by connecting the unit's COMPONENT VIDEO OUT jacks of your DVD
player with the COMPONENT video cables (not supplied).
Rear of the unit
y _lk Component video cord (not supplied)
±ru±r,[
_ I_ To COMPONENT IN
©
]
P
t_ To LINE 2AUDIO IN
[' Audio cord (not supplied)
NOTE:
• Component Video input of the unit are for use with a device which output 480i/1080i interlaced signals and
480p/720p progressive signals.
37
To Next Page
Loading...
Need help?
General
