9
EN
CD Player
Sampling Tracks
Press INTRO to play the first 10 seconds of each
track on the current disc, all discs in the tray, or
turn INTRO mode off. (Remote Only)
Repeat
• Press REPEAT on the remote control once to
repeat all tracks. lights on the
display.
•Press again to play a particular track
repeatedly. icon is displayed.
•Press a third time to de-select the function.
Setting Up a CD Program
1. In CD stop mode, press PROG•SET•CLEAR to
enter program mode. The next available
program location is displayed “0 PR 1”.
2. Press SKIP BACKWARD or SKIP
FORWARD to select a track.
3. Press PROG•SET•CLEAR to assign the
selected track to the program location.
The next available program location will then
be displayed. Repeat steps 2 and 3 to program
additional tracks.
The PROGRAM icon is displayed in program
mode.
Playing a Program List
While in PROGRAM mode, press PLAY/PAUSE .
Displaying the Program List
1. In CD stop mode, press PROG•SET•CLEAR to
enter PROGRAM mode.
2. Press PROG•SET•CLEAR repeatedly to list each
track assignment in the program list.
Deleting Program List
In PROGRAM mode, press and hold
PROG•SET•CLEAR for 3 seconds. The system
displays the message CLEAR.
Tips:
• Press display on the remote control
repeatedly to view elapsed track time,
track number, track remain time and disc
remain time.
Attention:
Do not push and force the CD door close
when the door is opening.
0 PR 1
Tips:
You can create a program of up to 20 tracks.
To Next Page
Loading...
Need help?
General
