10
EN
Radio
Selecting Tuner Band
1. Press TUNER•BAND•APP on the main unit or
tuner on the remote control to select TUNER.
2. Press TUNER•BAND•APP on the main unit or
band•app on the remote control to select
radio band.
Tuning to a Station
Press TUNING - or + on the main unit or
tune or to select frequencies.
Manually Setting Presets
1. Press TUNING - or + on the main unit
or tune or to access the desired
frequency.
3. Press the PROG•SET•CLEAR button once.
4. The most recently accessed program location
will be displayed.
5. If a different program location is preferred,
press PRESET STATION UP or DN to
select the desired preset number (1-30).
6. Press PROG•SET•CLEAR to store the selected
frequency at that preset.
Auto Preset Programming
(FM only)
Press and hold the TUNER•BAND•APP button for
2 seconds to scan stations in FM band. The
stations will then be stored as preset channels. A
maximum of 30 stations can be stored. Beware of
your preset channels being erased accidentally
because the scanning and storing process is auto-
matic upon pressing the button. You can stop the
automatic scan by pressing any button, but the
erased stations cannot be recovered.
Accessing Preset Stations
Press PRESET STATION UP or DN to access
the previous or next preset station. The
display first shows the preset program number
and after a few seconds, the frequency will be
displayed. (PR 01 FM is FM preset 1)
Suppressing Stereo Signal
Press to toggle between FM mono and
stereo for stereo FM stations.
Tips:
Your audio system has 30 preset stations.
To Next Page
Loading...
Need help?
General
