7
Settings
EN
Showing the Demonstration
Press DIMMER/DEMO to turn on/off demonstration
mode. The demonstration scrolls through all display
operations.
Setting Clock / Timer
Setting the Clock
1. Press and hold CLOCK until the hour flashes on
the display. CLOCK SET will show on the
second row of the display to indicate you are
currently in clock setting mode.
2. Press DIGITAL TUNING or on the
main unit or PRESET / PREV or
PRESET / NEXT on the remote control to
select the hour.
3. Press CLOCK to shift to minute digits.
4. Follow step 2 to set the minute digits.
5. Press PROG.•SET to confirm and save settings.
Press STOP to quit setting.
Note: When system is ON, you can press CLOCK to
display the current time (CURR TIME) for about 2
seconds.
Setting the Timer
1. Press and hold TIMER until ON 12:00 AM
appears with the hour flashing (ON - timer on
time). ALARM SET will show on the second
row of the display to indicate you are currently in
timer setting mode.
2. Press DIGITAL TUNING or on the
main unit or PRESET / PREV or PRESET /
NEXT on the remote control to select the
hour.
3. Press TIMER to shift to minute digits.
4. Repeat step 2 to select minute digits.
5. Press TIMER to shift to timer off time setting.
6. OF 12:00 AM (timer off time) will show on
the display with hour flashing. Repeat steps 2 - 4
for timer off time setting.
7. Press TIMER to select source.
8. Press DIGITAL TUNING or on the main
unit or PRESET / PREV or PRESET / NEXT
on the remote control to select between CD
MODE /TUNER / TAPE.
8. Press TIMER to set volume.
9. Rotate the VOLUME CONTROL knob on the
main unit or press VOL + or VOL - on the remote
control to set desired volume level.
10. Press PROG.•SET to confirm and save settings.
Press STOP to quit setting.
Activating the Timer
Press and release TIMER to activate and deactivate
the timer. will lit when the alarm is active.
12:00 AM
CLOCK SET
ON 12:00 AM
ALARM SET
To Next Page
Loading...
Need help?
General
