16
EN
Tape player
Playing a Tape
Tip: You can play a tape from either deck.
1. Press SOURCE repeatedly to select TAPE.
2. Press STOP/EJECT to open cassette door.
3. Insert a tape into the door and push the door
closed.
4. Press REW /F.FWD to position the tape
to the desired starting position. (Deck 1 Only)
5. Press PLAY to start playback .
Continuous Play
1. Insert a tape into deck 2 and start playback.
2. Insert a tape into deck 1 and press PLAY and
PAUSE together.
3. When the tape in deck 2 finishes playback, PAUSE
at deck 1 will be released automatically and start
playback.
Recording
From Tuner
1. Insert a tape into deck 1.
2. Press SOURCE repeatedly to select TUNER and
press BAND to access the desired radio band.
3. Tune to the station to be recorded.
4. Press RECORD to begin recording.
5. Press STOP/EJECT to end recording.
From CD
1. Insert a tape into deck 1.
2. Press SOURCE repeatedly to select CD.
3. Insert the disc(s) to be recorded.
4. Select the track, CD, or program to be recorded.
5. Press RECORD to begin recording when CD
begins to play.
6. Press STOP/EJECT to end recording.
Tape to Tape
1. Insert the destination tape in deck 1.
2. Insert the source tape into deck 2.
3. Press PAUSE and then RECORD on deck 1.
4. Press PLAY on deck 2. The playback and
recording start simultaneously.
From an Auxiliary Input
1. Insert the cassette in deck 1.
2. Press SOURCE repeatedly to select AUX.
3. Check that the auxiliary device has been
connected correctly to the GAME AUX connector on
the front of the audio system.
4. Start playback on the auxiliary device.
5. Press RECORD on deck 1 to begin recording.
6. Press STOP/EJECT to end recording.
To Next Page
Loading...
Need help?
General
