Features
Features
LCD display
The LCD display has a LED (Light Emitting Diode) for backlighting. The LED dims after
10 seconds of inactivity.
The first line of the display can show the Caller ID, time and date, or can show the
following status icons from left to right:
RSSI (Receive Signal Strength Indicator) - During a call, the number of bars is
proportional to the radio signal strength received
Line Indicators - Indicate the line number(s) being accessed or held.
Handset ID - Displays a 2-digit Handset ID
Battery Strength Indicator - Number of bars is proportional to the amount of
battery time remaining. Indicates charging when in charger cradle
The second and third lines can show status, Caller ID information, message, menu
selections, or editable characters.
The last line shows various left and right Soft Button functions.
End/Power Button
Press to end a call. Press for 3 seconds to turn the handset power ON or OFF.
Talk Button
Press to place a phone call, answer an incoming phone call, or make an intercom call
through the receiver or headset. The receiver or headset remains in use unless the
Speaker button is pressed.
To Next Page
Loading...
Need help?
General
