20
Slow Motion
You can view the picture in slow motion during play or play pause.
SLOW – and + allow you to change the speed. Sound is turned off
during slow-motion playback. Slow motion works best in the SP or
SLP speed.
1. During playback, Press SLOW + or – to start slow-motion
playback.
SLOW appears in the VCR’s display panel.
2. Press SLOW + to increase the speed or – to decrease the
speed.
3. Use TRACKING up or down to remove any streaks from
the picture.
4. Press PLAY to return to playback.
The VCR will automatically switch from slow-motion
playback to stop after a few minutes.
Automatic Tracking
The VCR has automatic tracking which adjusts the picture when
playing back a tape recorded on another VCR. Automatic tracking is
turned on whenever a tape is inserted or the VCR’s power is turned on.
Manual Tracking
Occasionally, you may need to manually adjust tracking on a tape
recorded on a different VCR or camcorder. The TRACKING buttons on
the remote or VCR are used when playing a tape. They have no effect
during recording.
When streaks or snow appear, press TRACKING up or down for the
best possible picture.
Press TRACKING up or down during stop-action pause to reduce
picture jitter.
Press both TRACKING buttons at the same time to turn automatic
tracking back on.
Using the Playback Features
Playing a Tape
To Next Page
Loading...
Need help?
General
