14
Troubleshooting
GPS
GPS technology works best in open spaces, when you have a clear view of the sky. Obstacles such as buildings and
trees can degrade the signal. Assuming that you’re outside when starting an activity, your Jet will automatically
acquire a GPS fix. You will notice a red blinking GPS logo on your Jet that turns into a solid triangle upon achieving
a GPS fix.
If you are having difficulty acquiring a GPS fix, take in to account the following circumstances:
- Your device is trying to acquire a fix for the first time.
- Your device has not been used for an extended period of time.
- Your device is being used indoors.
- Your device has traveled a long distance while being turned off.
- Your device is powered on indoors.
If you encounter any of these issues, in order to get a GPS fix, simply restart your Jet outdoors, in an open area and
wait a few minutes.
ASSISTED GPS – AGPS
AGPS helps to locate satellites within your local area, helping speed up the process of getting a GPS fix for your Jet.
To activate AGPS, connect Jet to your computer and run the Recon Uplink desktop app. After syncing Jet with your
Recon Engage account, Recon Uplink automatically transfers AGPS files to your Jet for your current location.
Alternatively, for quicker GPS fix, you can also connect Jet to a smart phone through Recon Engage mobile app to
achieve the same result.
FACTORY RESET
A factory reset clears all data that Jet has recorded. Performing a factory reset will clear your settings; uninstall any
Third Party Apps, and restores Jet back to its default settings – the ones it was shipped with.
Note: You should back up any files that you have on your Jet on to your Mac or PC before performing a Factory
Reset on your device. Also, make sure your Jet is fully charged prior to performing a reset.
To Next Page
Loading...
General