Reflex iC60N User Manual

Use
28
A9MA03EN 02/2012
Selection of the Operating Mode
Checking the Operating Mode
To check the operating mode of the Reflex iC60 circuit breaker, the handle must be in the upper position
(auto).
The LED indicates the operating mode:
z Mode 1: the LED flashes once green
z Mode 2: the LED flashes twice green
z Mode 3: the LED flashes three times green
NOTE: Selection of the operating mode is described in the next paragraph.
Default setting
Reflex iC60 circuit breaker type Default setting
A9C5•••• Mode 1
A9C6•••• Mode 3
auto
OFF
Reflex iC60N
Ready-Mode1.2.3
I. ON
O. OFF
Overheat
Mode 1
Mode 2
Mode 3
(Ti24)
1

Reflex iC60N Specifications

General

Brand	Reflex
Model	iC60N
Category	Power Tool
Language	English