RL78/G13 Safety Function (Frequency Detection)
R01AN0956EJ0100 Rev. 1.00 Page 5 of 70
Feb. 27, 2012
2. Operation Check Conditions
The sample code contained in this application note has been checked under the conditions listed in the table
below.
Table 2.1 Operation Check Conditions
Item Description
Microcontroller used RL78/G13 (R5F100LEA)
Operating frequency CPU/peripheral hardware clock:
The clock can be changed by depressing the target board’s switch. Predefine
each of the two constants for the clock as 32, 16, 8, 4, 2 or 1 MHz.
Operating voltage 5.0 V (Operation is possible at 2.9 V to 5.5 V.)
LVD operation (VLV): Reset mode 2.81 V (2.76 V to 2.87 V)
Integrated development
environment
CubeSuite+ V1.01.00 from Renesas Electronics Corp.
C compiler CA78K0R V1.30 from Renesas Electronics Corp.
Board used RL78/G13 target board (QB-R5F100LE-TB)
3. Related Application Note
The application note that is related to this application note is listed below for reference.
RL78/G13 Initialization (R01AN0451E) Application Note
To Next Page
Loading...
Need help?
General
