Revox C270 User Manual

Installation
Setup
Switching on the tape recorder
SEL
STEP
TRANS SEARCH RESET
When you press the POWER [1] key on the
front panel, the tape recorder switches on.
Press the same key again and it switches off.
When you switch on the tape recorder, the
VU-meters are illuminated and the last active
system parameters (tape speed, tape add-
ress) are shown on the real-time tape counter
[7], and the output selectors (INPUT, SYNC,
READY) are restored to their previous posi-
tion. The last active settings are stored again
when the unit is switched off.
The tape recorder cannot be switched on or
off by means of the remote control.
After the tape recorder has been switched on,
the Real Time counter [7] displays the chosen
tape speed “ips” for approx. 2 seconds. Sub-
sequently, the actual tape position is shown.

Revox C270 Specifications

General

Brand	Revox
Model	C270
Category	Cassette Player
Language	English