Erase Centre/Border
Erases both the centre and edge margins of the original image.
• The relationship between the original orientation and the erased part is as follows:
original original
1. Erased part
2. 2 - 99 mm (0.1 - 3.9 inches)
• To erase the image on the back side of the original, press [2 Sided Setting] and then [Back]. Erasing
the image on the back side is valid when you copy 2-Sided originals.
• The erase width is set to 10 mm (0.4 inch) as a default. You can change this setting under Edit in User
Tools. For details about Edit, see “Edit”.
Advanced Copier Functions
161
To Next Page
Loading...
Need help?
Printing Specifications
Paper Handling
Weight and Dimensions
