• Sticky originals such as translucent paper
• Thin or highly flexible originals
• Thick originals such as postcards
• Bound originals such as books
• Transparent originals such as OHP transparencies or translucent paper
• Originals that are still wet with ink or correction fluid
• The original might become dirty if it is written with a pencil or a similar tool.
Sizes Detectable with Auto Paper Select
This section describes sizes detectable by the exposure glass and ADF.
Type 1 and 2
Metric version
Size
A3
B4 JIS
A4
B5 JIS
A5
11×17 8
1
/
2
×
11
8
1
/
2
×
13
Original
location
Exposure
glass
*1 *2 *3 *4
×
*5
× ×
*8
ADF
*6 *7 *8
: Detectable size ×: Undetectable size
*1
Default is A3. If you want to switch the detectable size from A3 to 8K, contact your service
representative.
*2
Default is B4 JIS. If you want to switch the detectable size from B4 JIS to 8K, contact your service
representative.
*3
Default is A4. If you want to switch the detectable size from A4 to 16K, contact your service
representative.
*4
Default is B5 JIS. If you want to switch the detectable size from B5 JIS to 16K, contact your service
representative.
*5
If you want to make A5 size detectable, consult your service representative.
*6
Default is 11 × 17. If you want to switch the detectable size from 11 × 17 to 8K, contact your service
representative.
*7
Default is 8
1
/
2
× 11. If you want to switch the detectable size from 8
1
/
2
× 11 to 16K, contact your
service representative.
Originals
23