• The contents of errors may be printed on the Configuration Page. Check the Configuration Page in
conjunction with the error log. For details about how to print the Configuration Page, see "Test
Printing", Operating Instructions.
Alert Messages (Printed on Error Logs and Reports)
This section describes the likely causes of and possible solutions for the error messages that are printed
on the error logs or reports.
84: Error
There is no work area available for image processing. Select [Font Priority] for [Memory Usage] in
[System]. Decrease the number of files sent to the printer.
85: Error
The specified graphics library is unavailable. Check that the data is valid.
86: Error
Parameters of the control code are invalid. Check the print settings.
91: Error
Printing was canceled by the auto job cancel function due to a command error. Check that the data is
valid.
92: Error
Printing was canceled because the [Job Reset] key or the [Suspend/Resume] key was pressed on the
printer's control panel. Perform the print operation again as necessary.
Address book is in use.
The printer currently cannot perform authentication because the Address Book is being used by another
function. Wait a while, and then retry the operation.
Auto-user prog. failed.
Automatic registration of information for LDAP Authentication or Windows Authentication failed because
the Address Book is full.
For details about automatic registration of user information, see Security Guide.
Cannot print.
The PDF document you have tried to print has no privileges to print.
Contact the owner of the document.
3. Troubleshooting
62
To Next Page
Loading...
Need help?
General