Checking the Error Log
If files could not be stored due to printing errors, identify the cause of the errors by checking the error log
on the control panel.
• The most recent 30 errors are stored in the error log. If a new error is added when there are 30
errors already stored, the oldest error is deleted. However, if the oldest error is a Sample Print,
Locked Print, Hold Print, or Stored Print error, it is not deleted. The error is stored separately until the
number of errors reaches 30.
• If the main power switch is turned off, the log is deleted.
• You cannot view [Error Log] on the Simple Screen.
Press [Option], and then select setting items using the [ ] or [ ] key.
1. Select [Error Log] Press [OK]
2. Select a type of print jobs. Press [OK]
3. Select the error log you want to check.
3. Troubleshooting
66
To Next Page
Loading...
Need help?
General