Settings You Can Change with User Tools
51
4
Settings You Can Change with User Tools
Reference
To access User Tools, see p.50 “Changing Default Settings”.
General Features
❖
❖❖
❖ Panel Tone
The beeper (key tone) sounds when a key is pressed.
Note
❒ Default: On
❖
❖❖
❖ Warm Up Notice (Copier/Document Server)
You can set the beeper to sound when the machine becomes ready for copy-
ing after reviving from Energy Saver mode, or when the power is turned on.
Note
❒ Default: On
❒ If the Panel Tone setting is “Off”, the beeper will not sound, regardless of
the Warm Up Notice setting.
❖
❖❖
❖ Copy Count Display (Copier/Document Server)
The copy counter can be set to show the number of copies made (count up) or
the number of copies yet to be made (count down).
Note
❒ Default: Up (count up)
❖
❖❖
❖ Function Priority
You can specify the mode to be displayed immediately after the operation
switch or System Reset mode is turned on.
Note
❒ Default: Copier
MartiniC2_GBzen_F_pre_FM.book Page 51 Thursday, October 21, 2004 5:07 PM
To Next Page
Loading...
Need help?
General
