When the Indicator Lamp for the [Check Status]
Key Is Lit or Flashing
If the indicator lamp for the [Check Status] key lights up or flashes, press the [Check Status] key to
display the [Check Status] screen. Check the status of each function in the [Check Status] screen.
[Check Status] screen
1. [Mach./Applic. Stat] tab
Indicates the status of the machine.
2. [Check]
If an error occurs in the machine, press [Check] to view details.
Pressing [Check] displays an error message or the screen. Check the error message displayed on the screen
and take the appropriate action. For details about how to resolve the problems described in error messages,
see "When Messages Appear", Troubleshooting.
3. Messages
Displays a message that indicates the status of the machine.
4. Status icons
The status icons that can be displayed are described below:
: The machine is performing a job.
: An error has occurred on the machine.
: The machine cannot be used because an error has occurred in the machine. This icon may also appear if
the toner is running low.
The following table explains problems that cause the indicator lamp for the [Check Status] key to light or
flash.
5. Troubleshooting
72
To Next Page
Loading...
Need help?
General
