A-15
Moving Color Controller
Moving Color Controller
CAUTION:
•
When disconnecting the power cord from the wall outlet, make sure to pull
the plug, not the cord. Do not pull the power cord forcibly. Doing so can
damage the power cord, possibly resulting in fire or electric shock.
CAUTION:
•
When moving the machine, make sure to unplug the power cord from the
wall outlet and confirm that line cords and other connecting cables have
been removed. Otherwise, the power cord is damaged, possibly resulting in
fire or electric shock.
CAUTION:
•
When carrying or moving the machine by lifting it for relocation to another
floor, contact your service representative. Dropping or toppling the machine
can result in injury or malfunction.
❒ When moving the machine, the following precautions should always be fol-
lowed:
• Turn off the main power. See page A-17 “Shutting Down the Main Unit
and Color Controller” or page A-18 “Shutting Down Color Controller
Only”.
• Unplug the power cord from the wall outlet. When doing this, grip
the plug so as not to stress the cord, reducing the risk of fire or electric
shock.
❒ Move the machine carefully. If you do not, the machine might be damaged
or data lost.
❒ Protect the machine from impact. Shock could damage the hard disk and
result in data loss.
To Next Page
Loading...
Need help?
General
