7. Install the Fax Unit [A] on the Machine.
8. Assemble the machine.
9. Plug in the machine and turn ON the main power.
If a message states that the SRAM has been formatted due to a problem with SRAM, turn OFF then
ON the main power again to clear the message. Enter the "User Tools" mode and set date and
time.
10. Do SP3102-000 in the fax SP mode and enter the serial number for the fax unit.
11. Enter the correct country code with SP2103-001 (NCU Country/ Area Code Setting).
12. Exit the SP mode, and turn OFF then ON the main power.
1. Installation
10
To Next Page
Loading...
Need help?
General
