102 Erase All Files
000 Erases all files stored in the SAF memory.
103 Reset Bit Switches (except Secure)
000 Resets the bit switches and user parameters.
104 Factory setting
000 Resets the bit switches and user parameters, user data in the SRAM
and files in the SAF memory.
105 Reset All Bit Switches
000 Initializes all the current bit switch settings.
106 Reset Secure Bit Switches
000 Initializes only the security bit switches. If you select automatic output/
display for the user parameter switches, the security settings are
initialized.
SP6-XXX (Report)
6 Mode No. Function
101 System Parameter List
000 - Touch the “ON” button to print the system
parameter list.
102 Service Monitor Report
000 - Touch the “ON” button to print the service monitor
report.
103 G3 Protocol Dump List
002 G3-1 (All
Communications)
Prints the protocol dump list of all communications
for the G3-1 line.
003 G3-1
(1 Communication)
Prints the protocol dump list of the last
communication for the G3-1 line.
Service Tables
63
To Next Page
Loading...
Need help?
General
